25 January 2001 Experimental study of a laser processing head with integrated jet of metal powder for rapid prototyping and production of protective coatings
Author Affiliations +
Proceedings Volume 4184, XIII International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference; (2001) https://doi.org/10.1117/12.414010
Event: XIII International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference, 2000, Florence, Italy
Abstract
A controllable, homogeneous stream of metal powder particles is remelted by a focused, coaxial CO2 laser beam at the outlet of a multi-stream nozzle and applied for production of the protective coatings and volumetric structures for prototyping. For the stellite SF6 layers the optical, chemical, and metallographic tests show the fine-grained and chemically homogeneous structures with only a minor presence ofthe Cr/C precipitates and local micro-defects.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rafal Jendrzejewski, Rafal Jendrzejewski, A. Conde, A. Conde, J. de Damborenea, J. de Damborenea, Gerard Sliwinski, Gerard Sliwinski, } "Experimental study of a laser processing head with integrated jet of metal powder for rapid prototyping and production of protective coatings", Proc. SPIE 4184, XIII International Symposium on Gas Flow and Chemical Lasers and High-Power Laser Conference, (25 January 2001); doi: 10.1117/12.414010; https://doi.org/10.1117/12.414010
PROCEEDINGS
4 PAGES


SHARE
Back to Top