Translator Disclaimer
22 January 2001 UV inspection of EUV and SCALPEL reticles
Author Affiliations +
A UV inspection tool has been used to image and inspect Next Generation Lithography (NGL) reticles. Inspection images and simulations have been used to provide feedback to mask makers so that inspectability of NGL masks can be optimized. SCALPEL masks have high optical contrast and look much the same in reflection as conventional chrome on glass masks do in transmission. EPL stencil masks can be imaged well in reflection, but defects below the top surface, in the cutouts, may not be detectable optically. EUV masks that have been made to date tend to have relatively low contrast, with line edge profiles that are complex due to interference effects. Simulation results show that improved EUV inspection images can be obtained with a low reflectivity absorbing layer and proper choice of buffer layer thickness.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Donald W. Pettibone, Noah Bareket, Ted Liang, Alan R. Stivers, Scott Daniel Hector, Pawitter J. S. Mangat, Douglas J. Resnick, Michael J. Lercel, Mark Lawliss, Christopher Magg, Anthony E. Novembre, and Reginald C. Farrow "UV inspection of EUV and SCALPEL reticles", Proc. SPIE 4186, 20th Annual BACUS Symposium on Photomask Technology, (22 January 2001);


EUVL: transition from research to commercialization
Proceedings of SPIE (August 28 2003)
Cr absorber mask for extreme-ultraviolet lithography
Proceedings of SPIE (January 22 2001)
Inspection and repair of EUV
Proceedings of SPIE (March 11 2002)
Inspection of EUV reticles
Proceedings of SPIE (July 01 2002)
Optical inspection of EUV and SCALPEL reticles
Proceedings of SPIE (September 05 2001)

Back to Top