12 February 2001 Automated alignment by hybrid video and 3D video Moire with both conventional and parallel processing
Author Affiliations +
A problem common to automated assembly in manufacturing or in automated docking of spacecraft is angular and lateral alignment of components. A hybrid video system utilizing both conventional imaging and 3-D video moiré has been developed to automatically align a test target with three translational and two rotational degrees of freedom. Alignment was demonstrated via computer controlled translation and rotation stages. The video moiré system is operated in an error map mode, in which a structurally illuminated reference surface is used to chromakey the image of an identical structurally illuminated alignment target. The output is a moiré image generated by the misalignment of the two surfaces; further processing indicates the degree and direction of the misalignment. The translation alignment error signals (x, z, zoom) are generated by conventional image processing operating on filtered or non-structurally illuminated images. In one design, translational and rotational alignments are handled by separate processors controlled by a single host, and might use synthesized images as reference: the off center and smaller image of a laterally misaligned and distant target can be zoomed and centered with respect to a synthetic image. In another design, the synthetic image is passed to the angular alignment program while translational alignment takes place, so that coarse angular alignment can proceed essentially in parallel with the lateral and range alignment. Thus both sequential and parallel processing can be utilized to solve the alignment problem.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Barbara Garita, Barbara Garita, Hector Gutierrez, Hector Gutierrez, Ildiko Laszlo, Ildiko Laszlo, Joel H. Blatt, Joel H. Blatt, } "Automated alignment by hybrid video and 3D video Moire with both conventional and parallel processing", Proc. SPIE 4189, Machine Vision and Three-Dimensional Imaging Systems for Inspection and Metrology, (12 February 2001); doi: 10.1117/12.417187; https://doi.org/10.1117/12.417187


FPGA implementation of real-time digital image stabilization
Proceedings of SPIE (February 20 2014)
Video surveillance using distance maps
Proceedings of SPIE (February 14 2006)
Hardware system for computing image velocity in real time
Proceedings of SPIE (October 31 1992)
Real-time wavelet based blur estimation on cell BE platform
Proceedings of SPIE (February 04 2010)
Multi-sensor visual measurement system based on 1394 bus
Proceedings of SPIE (December 31 2008)
A memory and MHZ efficient EDMA transfer scheme for video...
Proceedings of SPIE (February 25 2008)
DSP-based hardware for real-time video coding
Proceedings of SPIE (April 29 1992)

Back to Top