6 March 2001 Thermal design of retroreflective stray light fore-baffles for spaceborne optical systems
Author Affiliations +
Proceedings Volume 4198, Optomechanical Engineering 2000; (2001) https://doi.org/10.1117/12.417355
Event: Intelligent Systems and Smart Manufacturing, 2000, Boston, MA, United States
Abstract
The use of stray light fore-baffles in space-borne optical systems solves the problem of protecting the optical system from unwanted radiation. However, this introduces the problem of adding a large area black cavity at the system entrance aperture, and this cavity will run hot due to capture of solar, planetary albedo, and planetary emission radiation. The optical system may need to be baffled by a cool shield to keep system absolute temperatures sufficiently low. Alternately, a reflecting baffle system can be used that retro-reflects the input environment radiation. This reduces absorbed heat loads by the baffle system and reduces system absolute temperature levels.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Edward Schneider, Edward Schneider, } "Thermal design of retroreflective stray light fore-baffles for spaceborne optical systems", Proc. SPIE 4198, Optomechanical Engineering 2000, (6 March 2001); doi: 10.1117/12.417355; https://doi.org/10.1117/12.417355
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT

Getting the sunshine right
Proceedings of SPIE (October 11 1999)
Baseline design of the SUNRISE Telescope
Proceedings of SPIE (September 28 2004)
New design concept of supermirror for hard x-ray telescope
Proceedings of SPIE (November 14 2001)
A Vacuum Solar Thermal Collector With Optimal Concentration
Proceedings of SPIE (October 31 1977)

Back to Top