28 December 2000 High-resolution color organic light-emitting diode microdisplay fabrication method
Author Affiliations +
Proceedings Volume 4207, Digital Cinema and Microdisplays; (2000) https://doi.org/10.1117/12.411762
Event: Information Technologies 2000, 2000, Boston, MA, United States
Abstract
We report experimental results on the evaluation of a sealing technique for organic light emitting diodes (OLEDs) used for high-resolution color microdisplay applications. Based on production and processing requirements for active matrix OLEDs (AMOLEDs) on silicon, the sealing process must protect the device against moisture and oxygen, not only during operation and storage but also during production. A conformal polymer/metal(oxide)/polymer multi-layer technology was selected for this purpose. AMOLED test structures were produced and tested with and without sealing under ambient conditions as well as in water. The applied sealing process was shown to be compatible with all steps of the OLED-based microdisplay production of eMagin Corporation. Our results confirm that encapsulating AMOLEDs with the described process leads to increased stability, both under operation as well as for storage purposes.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wilhelm Graupner, Christian M. Heller, Amalkumar P. Ghosh, Webster E. Howard, "High-resolution color organic light-emitting diode microdisplay fabrication method", Proc. SPIE 4207, Digital Cinema and Microdisplays, (28 December 2000); doi: 10.1117/12.411762; https://doi.org/10.1117/12.411762
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT


Back to Top