16 April 2001 Fatigue behavior of silica fibers with different defects
Author Affiliations +
Abstract
Comparison of high-speed strength data for weak (abraded, contaminated and indented) and pristine fibers was performed. It was shown that fatigue behavior of abraded fiber practically coincides with that of the fiber contaminated by zirconia powder and is close to that of indented fiber. The fatigue parameters obtained for strong pristine fiber cannot be used to obtain the correct prediction of fiber strength after proof testing. A two-region power law model was used for mathematical description of these results and the fatigue parameters for three types of weak fibers were obtained.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sergey L. Semjonov, Sergey L. Semjonov, G. Scott Glaesemann, G. Scott Glaesemann, Donald A. Clark, Donald A. Clark, Mikhail M. Bubnov, Mikhail M. Bubnov, } "Fatigue behavior of silica fibers with different defects", Proc. SPIE 4215, Optical Fiber and Fiber Component Mechanical Reliability and Testing, (16 April 2001); doi: 10.1117/12.424378; https://doi.org/10.1117/12.424378
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Models for fiber reliability
Proceedings of SPIE (November 17 1993)
Concept of reliability of optical fibers
Proceedings of SPIE (June 24 2002)
Mechanical behavior of low and high strength carbon coated...
Proceedings of SPIE (September 27 1994)

Back to Top