Paper
14 October 1983 Ka-band and Q-band Communication Amplifier
T. Best, E. Holmes, C. Ito, Y. C. Ngan
Author Affiliations +
Abstract
Two high power communication amplifiers operating in the Extremely High Frequency (EHF) spectrum are described. Both amplifiers are based on silicon double-drift IMPATT diodes for power generation. The first amplifier operates in the high gain, narrowband injection-locking mode and represents a first step toward low cost manufacturing of this type of amplifier. It is capable of 6.2 W and 31 dB gain at 36.79 GHz, with 250 MHz injection-locking bandwidth. The second amplifier operates in the low gain, wideband negative resistance mode in which there is no power output in the absence of an input signal. A state-of-the-art power output in excess of 3.5 W was achieved from 43.5 to 44.5 GHz with a nominal 3 dB gain. This amplifier is in its advanced development stage.
© (1983) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Best, E. Holmes, C. Ito, and Y. C. Ngan "Ka-band and Q-band Communication Amplifier", Proc. SPIE 0423, Millimeter Wave Technology II, (14 October 1983); https://doi.org/10.1117/12.936158
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Diodes

Waveguides

Ka band

Extremely high frequency

Resistance

Solid state physics

RELATED CONTENT

60 GHz downconverter
Proceedings of SPIE (December 01 1990)
Uniplanar integrated Ka-band mixer
Proceedings of SPIE (December 01 1990)
Ka/Q Band IMPATT Amplifier Technology
Proceedings of SPIE (October 14 1983)
Recent Advances In Millimeter Wave IMPATT Sources
Proceedings of SPIE (October 22 1982)

Back to Top