6 October 2000 Recent progress on asphere manufacturing and testing at CIOM
Author Affiliations +
Proceedings Volume 4231, Advanced Optical Manufacturing and Testing Technology 2000; (2000) https://doi.org/10.1117/12.402743
Event: International Topical Symposium on Advanced Optical Manufacturing and Testing Technology, 2000, Chengdu, China
Abstract
The manufacturing procedure of a 500 mm in diameter, f/2 hyperbolic primary mirror based on Computer-Controlled Polishing is introduced in detail. The mirror was finally polished to the shape accuracy of 13 nm rms and the surface roughness of 2 nm Ra. Testing methods and data analysis for different stages ranging from grinding to polishing are discussed. Some critical factors affecting the efficiency and accuracy of the grinding/polishing procedure are summarized. In addition, the preliminary work to make large off-axis asphere mirrors is presented. The difficulties in polishing and testing for both circular aperture and rectangular aperture mirrors are previewed, and a possible solution is given. To control the geometrical parameters such as radius of curvature and conic constant, a new profiler has been built, and it has proven very useful to improve the grinding efficiency. Finally, the manufacturing of small aspheres using deterministic grinding tool is also introduced. The fine grinding procedure of LOH's asphere grinding machine is presented.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xuejun Zhang, Zhongyu Zhang, Quandou Wang, Jingchi Yu, "Recent progress on asphere manufacturing and testing at CIOM", Proc. SPIE 4231, Advanced Optical Manufacturing and Testing Technology 2000, (6 October 2000); doi: 10.1117/12.402743; https://doi.org/10.1117/12.402743
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

The advancement of the high precision stress polishing
Proceedings of SPIE (October 28 2016)
Machining and Measuring of an Off-axis Paraboloid
Proceedings of SPIE (October 19 2005)
Flexible precision asphere manufacturing
Proceedings of SPIE (May 14 2007)
Criterion to appreciate difficulties of aspherical polishing
Proceedings of SPIE (September 24 2004)
Fabrication of off-axis optical segments
Proceedings of SPIE (December 10 1992)

Back to Top