Temperature optical sensor based on a silicon bimodal Y branch

Giovanni Breglio; Giuseppe Coppola; Antonello Cutolo; Andrea Irace; Marco Bellucci; Mario Iodice

doi:10.1117/12.426919

18 May 2001 Temperature optical sensor based on a silicon bimodal Y branch

Giovanni Breglio, Giuseppe Coppola, Antonello Cutolo, Andrea Irace, Marco Bellucci, Mario Iodice

Author Affiliations +

Proceedings Volume 4293, Silicon-based and Hybrid Optoelectronics III; (2001) https://doi.org/10.1117/12.426919
Event: Symposium on Integrated Optics, 2001, San Jose, CA, United States

Abstract

A novel temperature optical sensor configuration, based on mode mixing principle, is theoretically discussed. The sensing element consists of a single-mode all-silicon waveguide, followed by a two-modes section, which acts as sensing region, and an output Y branch to separate the two output channels. The fundamental mode coming from input waveguide excites both the fundamental mode and the first higher order mode in the sensing region. The interference between the two propagating modes in the sensing region produces a periodically repeated optical intensity distribution along the propagation axis. It is possible to observe a light steering from one output channel to the other caused by the temperature change of the structure itself. This fact is related to the variation of the material refractive index with the temperature, that is the thermo-optic effect, which implies a variation of the mode effective refractive indices, and, consequently, a phase shift between the modes themselves. In this way, a continuous variation of the power distribution on the two output waveguides as a function of the temperature can be observed. A simultaneous acquisition of both output signals, followed by a simple elaboration, allows obtaining a temperature evaluation independent on light source instability. Moreover, it is possible to design the device in order to obtain the desired initial output power distribution on two channels. This permits to design sensors characterized by greater accuracy, if we use the linear part of the optical transfer function, or larger measure range, if we utilize the whole output excursion.

Citation Download Citation

Giovanni Breglio, Giuseppe Coppola, Antonello Cutolo, Andrea Irace, Marco Bellucci, and Mario Iodice "Temperature optical sensor based on a silicon bimodal Y branch", Proc. SPIE 4293, Silicon-based and Hybrid Optoelectronics III, (18 May 2001); https://doi.org/10.1117/12.426919

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE