22 June 2001 Spherical stereoscopic sensor for 3D color imaging
Author Affiliations +
Abstract
This paper describes the development of an original stereoscopic sensor suitable for cylindrical and spherical 3D imaging. Its principle is based on the rotation of two linear CCD cameras with their optical center on the rotation axis of a stepper motor. The architecture of the sensor allows us to obtain panoramic images with a cylindrical geometry. By adding a second rotation axis orthogonal to the first rotation axis, color stereoscopic spherical images are obtained. This second axis gets through the middle of the two cameras. Due to the geometrical precision acquisition of the color pixels and the faithful restitution of the colors, high quality color images are obtained. The concept of this sensor simplifies calibration and feature matching by reducing classical 2D matching problem to 1D. This original sensor is dedicated to real scenes acquisition for multimedia and motion pictures applications over 360 X 360 degrees.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Ea, Thomas Ea, Olivier Romain, Olivier Romain, Claude Gastaud, Claude Gastaud, Patrick F. Garda, Patrick F. Garda, } "Spherical stereoscopic sensor for 3D color imaging", Proc. SPIE 4297, Stereoscopic Displays and Virtual Reality Systems VIII, (22 June 2001); doi: 10.1117/12.430805; https://doi.org/10.1117/12.430805
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Low-cost 3D rangefinder system
Proceedings of SPIE (June 17 1998)
Self calibration of a 3D object scanner based on a...
Proceedings of SPIE (December 13 1998)
Kodak DCS200: a camera for high-accuracy measurements?
Proceedings of SPIE (September 12 1995)
Research on calibration method of LAMOST fiber robot
Proceedings of SPIE (September 16 2011)
Detection and modeling of rough component envelopes
Proceedings of SPIE (August 27 1995)

Back to Top