Translator Disclaimer
28 May 2001 Orthopedic surgical analyzer for percutaneous vertebroplasty
Author Affiliations +
Abstract
Since the spine is one of the most complex joint structures in the human body, its surgical treatment requires careful planning and high degree of precision to avoid any unwanted neurological compromises. In addition, comprehensive biomechanical analysis can be very helpful because the spine is subject to a variety of load. In case for the osteoporotic spine in which the structural integrity has been compromised, it brings out the double challenges for a surgeon both clinically and biomechanically. Thus, we have been developing an integrated medical image system that is capable of doing the both. This system is called orthopedic surgical analyzer and it combines the clinical results from image-guided examination and the biomechanical data from finite element analysis. In order to demonstrate its feasibility, this system was applied to percutaneous vertebroplasty. Percutaneous vertebroplasty is a surgical procedure that has been recently introduced for the treatment of compression fracture of the osteoporotic vertebrae. It involves puncturing vertebrae and filling with polymethylmethacrylate (PMMA). Recent studies have shown that the procedure could provide structural reinforcement for the osteoporotic vertebrae while being minimally invasive and safe with immediate pain relief. However, treatment failures due to excessive PMMA volume injection have been reported as one of complications. It is believed that control of PMMA volume is one of the most critical factors that can reduce the incidence of complications. Since the degree of the osteoporosis can influence the porosity of the cancellous bone in the vertebral body, the injection volume can be different from patient to patient. In this study, the optimal volume of PMMA injection for vertebroplasty was predicted based on the image analysis of a given patient. In addition, biomechanical effects due to the changes in PMMA volume and bone mineral density (BMD) level were investigated by constructing clinically relevant finite element models. In conclusion, we were able to demonstrate the feasibility of our orthopedic surgical analyzer in a case for percutaneous vertebroplasty.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gye Rae Tack, Hyung Guen Choi, Do Hyung Lim, and Sung Jae Lee "Orthopedic surgical analyzer for percutaneous vertebroplasty", Proc. SPIE 4319, Medical Imaging 2001: Visualization, Display, and Image-Guided Procedures, (28 May 2001); https://doi.org/10.1117/12.428052
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top