Modeling piezoceramic twist actuation in a single-cell anisotropic torque box

Peter Cseke Jr.; Gregory S. Agnes

doi:10.1117/12.436542

16 August 2001 Modeling piezoceramic twist actuation in a single-cell anisotropic torque box

Peter Cseke Jr., Gregory S. Agnes

Author Affiliations +

Proceedings Volume 4327, Smart Structures and Materials 2001: Smart Structures and Integrated Systems; (2001) https://doi.org/10.1117/12.436542
Event: SPIE's 8th Annual International Symposium on Smart Structures and Materials, 2001, Newport Beach, CA, United States

Abstract

Replacing articulated flight control surfaces with adaptive controls reduces surface discontinuities, and enhances low observability. Actuation of the aerodynamic surfaces is achieved by an electric field applied to PZT actuators embedded in the top and bottom skins, creating differential strain and shear (torsion) in the host substrate. The torsion of the torquebox was modeled in the presence of a full complement of air-loads by extending the Bredt-Batho theorem. This was accomplished through modifying Libove's method, using a thin-walled, linearly elastic, fully anisotropic, trapezoid cross-section beam. The linear tip twist angles due to a uniform cross-sectional moment were verified using the isotropic Bredt-Batho theorem, and published anisotropic results by applying isotropic, then anisotropic laminate elastic properties. The isotropic solutions were within 3.1%; the anisotropic results were within 6.9-10.9% of the published angles. The PZT actuation of the host structure was achieved by substituting PZT- composite laminate elastic properties into the derived solution and inducing strain and shear of the PZT lamina by composite laminate elastic properties into the derived solution and inducing strain and shear of the PZT laminae, the angular twist as a function of the host lamina orientation angle and applied voltage was recorded. The amount of twist ranged between 0.03 and 0.40 degrees, and 0.12-1.04 degrees for the AFC and G-1195 PZT laminae respectively.

Citation Download Citation

Peter Cseke Jr. and Gregory S. Agnes "Modeling piezoceramic twist actuation in a single-cell anisotropic torque box", Proc. SPIE 4327, Smart Structures and Materials 2001: Smart Structures and Integrated Systems, (16 August 2001); https://doi.org/10.1117/12.436542

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE