16 August 2001 Shape control of circular plate with piezoelectric sheet actuators
Author Affiliations +
Abstract
In recent years, there has been a surge of interest in using piezoelectric patches attaches to optical surfaces in hope of attaining high precision of optical mirrors with minimal additional weight. Based on results from preliminary investigations, the configuration of thin piezoelectric strip actuators placed in the radial and circumferential line directions of a circular plate (host structure of the mirror) is chosen to control the surface error of the mirror. The major challenges here is the two dimensional actuation effect of the actuator patches, which could induce high order modal deformations and increase the difficulty of surface error control. The purpose of this research is to investigate such effects and propose solutions. A simple model is first developed through Hamilton's principle and discretized using Galerkin's method, thus giving a set of differential equations describing the coupled mechanical and electrical systems. Form the equations, the coupling between the electrical and structural systems for each mode shape can be calculated, thus giving a means to maximize the coupling between the actuator and the mode shapes of interest by changing the actuator's properties. Likewise, the properties can be tailored such that excitation of the unwanted modes can be avoided or reduced. A more comprehensive finite element model is also derived to validate the observations obtained from the simple model. From the analysis, it si found that decoupling of the circumferential action from the radial action of the piezoelectric patches can dramatically improve the performance of the controller, thus achieving a greater reduction in the surface error. Methods to decouple the circumferential strain from the radial strain are then proposed.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Keith Philen, Kon-Well Wang, "Shape control of circular plate with piezoelectric sheet actuators", Proc. SPIE 4327, Smart Structures and Materials 2001: Smart Structures and Integrated Systems, (16 August 2001); doi: 10.1117/12.436578; https://doi.org/10.1117/12.436578
PROCEEDINGS
11 PAGES


SHARE
KEYWORDS
Actuators

Mirrors

Finite element methods

Error control coding

Monochromatic aberrations

Partial differential equations

Systems modeling

RELATED CONTENT

Orthogonality of Zernike polynomials
Proceedings of SPIE (September 09 2002)
Simulation of small structures/optics/controls system
Proceedings of SPIE (October 01 1990)
First order analysis of thin plate deformable mirrors
Proceedings of SPIE (February 07 2003)
Active support of ultra thin mirror
Proceedings of SPIE (May 30 2006)
Bending modes for active optics
Proceedings of SPIE (September 16 2011)

Back to Top