2 July 2001 Design, testing, and model validation of an MR squeeze-flow vibration damper
Author Affiliations +
Abstract
Ongoing research at the University of Sheffield is currently concerned with the design and construction of magneto- rheological (MR) squeeze-flow vibration damper. Previous work has demonstrated the feasibility of employing such a device as the key component in a controllable vibration isolator. The work also demonstrated the inadequacies of existing mathematical models which do not account for the observed behavior of MR fluids in squeeze flow. In parallel with investigations into the behavior of MR dampers, a collaborative programme between the Universities of Liverpool and Sheffield is also in progress. Here attention is focussed on ER fluids in squeeze-flow and a new test facility has been constructed for use in the development and validation of mathematical models. It is anticipated that this collaborative programme will assist in the development of both ER and MR squeeze-flow models. In this paper, the authors present a summary of progress to date.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Neil D. Sims, Neil D. Sims, Roger Stanway, Roger Stanway, Andrew R. Johnson, Andrew R. Johnson, Phillip Mellor, Phillip Mellor, } "Design, testing, and model validation of an MR squeeze-flow vibration damper", Proc. SPIE 4331, Smart Structures and Materials 2001: Damping and Isolation, (2 July 2001); doi: 10.1117/12.432695; https://doi.org/10.1117/12.432695
PROCEEDINGS
10 PAGES


SHARE
Back to Top