Paper
3 August 2001 Measurement of vibrations of tall buildings with GPS: a case study
Yongqi Chen, Dingfa Huang, Xiaoli Ding, Y. L. Xu, Jan Ming Ko
Author Affiliations +
Abstract
Experimental studies have been carried out to employ GPS to measure the vibrations of the 384 m tall Di Wang building in Shenzhen, China. Two GPS receivers were employed in the experiment with one set on the top of the building and the other on a reference station on the ground near-by. The GPS data were collected at a rate of 4 sets per second. The experiment was conducted under different weather conditions over two 24-hour periods. This paper describes the GPS equipment used, the field operations, the data processing and analysis strategies, and the results obtained from the study. It is shown from the study that GPS can be successfully applied for monitoring structural vibrations. However cautions have to be exercised in analyzing GPS data to remove biases such as the so-called GPS multi-path errors. Besides, some practical issues still need resolved before GPS can be applied routinely for this type of applications.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongqi Chen, Dingfa Huang, Xiaoli Ding, Y. L. Xu, and Jan Ming Ko "Measurement of vibrations of tall buildings with GPS: a case study", Proc. SPIE 4337, Health Monitoring and Management of Civil Infrastructure Systems, (3 August 2001); https://doi.org/10.1117/12.435624
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Global Positioning System

Buildings

Receivers

Data processing

Error analysis

Satellites

Wavelets

Back to Top