20 August 2001 Application of advanced 100-kV EB writer EB-X3 for 100-nm node x-ray mask fabrication
Author Affiliations +
Most important issues in a precise X-ray mask fabrication are the mask materials and EB writing to achieve good accuracy in critical dimension (CD) control and image placement (IP). However, 1-to-1 X-ray mask is required severe accuracy in comparison with photo reticles. The following discussions focus on how to realize the precise IP accuracy. We installed and evaluated 100-kV electron-beam (EB) mask writer (EB-X3), and developed the writing process on a thin membrane. Key factors in accurate EB mask writing include not only EB positioning accuracy but also mask distortions caused by mask holding and the temperature change of the mask and a mask holder. This paper presents mask distortion characteristics due to the holding, temperature change, and then, good results of mask accuracy of 4-Gb dynamic random access memory (DRAM) test patterns (gate and contact layers) and 90 nm SRAM test patterns. In addition, we employed the advanced PAT method with 4-multi-pass writing that adequately compensates the process-induced mask distortion and the beam drift. These improvements resulted in IP accuracy of better than 10 nm (3(sigma) ), 100 nm CD uniformity within 8 nm (mean shift +/- 3(sigma) ) and the overlay accuracy within 10 nm for 4-Gb gate and contact layers with a 24 mm x 24 mm area on the X-ray membrane mask. These results demonstrate that we can actually fabricate precise X-ray membrane masks that meet our final target of IP accuracy corresponding to the 100 nm technology node.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroshi Watanabe, Hiroshi Watanabe, Yoshinori Nakayama, Yoshinori Nakayama, Shinji Tsuboi, Shinji Tsuboi, Mizunori Ezaki, Mizunori Ezaki, Hajime Aoyama, Hajime Aoyama, Yasuji Matsui, Yasuji Matsui, Tetsuo Morosawa, Tetsuo Morosawa, Masatoshi Oda, Masatoshi Oda, } "Application of advanced 100-kV EB writer EB-X3 for 100-nm node x-ray mask fabrication", Proc. SPIE 4343, Emerging Lithographic Technologies V, (20 August 2001); doi: 10.1117/12.436670; https://doi.org/10.1117/12.436670


Next generation mask coordinate measuring technology
Proceedings of SPIE (November 02 1994)
Precise x ray mask writing technology using advanced 100 kV...
Proceedings of SPIE (September 04 2001)
Newly developed mask observation SEM JWS-7800
Proceedings of SPIE (November 02 1994)
Possibility of a spin cup method
Proceedings of SPIE (August 31 1998)

Back to Top