14 September 2001 High-numerical-aperture 193-nm exposure tool
Author Affiliations +
As the semiconductor industry accelerates the pace of change, a shift in exposure wavelength from 248 nm to 193 nm becomes inevitable. Correspondingly, the change to a shorter wavelength and the desire to maintain productivity, necessitates a fundamental reassessment of system design approach. Evaluation of resolution and k-factor for a lithographic tool operating at 193 nm and 0.75 numerical aperture indicates that 130 nm node production will be manageable with binary mask, and that performance consistent with 100 nm node requirements and potentially beyond will be achievable with the use of advanced lithographic techniques. This paper reviews the design, system performance analysis and early results for a full-field catadioptric lithography tool operating at numerical apertures up to 0.75 NA.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Harry Sewell, Harry Sewell, Daniel R. Cote, Daniel R. Cote, David M. Williamson, David M. Williamson, Mark L. Oskotsky, Mark L. Oskotsky, Lev Sakin, Lev Sakin, Tim O'Neil, Tim O'Neil, John D. Zimmerman, John D. Zimmerman, Richard Zimmerman, Richard Zimmerman, Mike Nelson, Mike Nelson, Christopher J. Mason, Christopher J. Mason, David Ahouse, David Ahouse, Hilary G. Harrold, Hilary G. Harrold, Philip Lamastra, Philip Lamastra, David Callan, David Callan, } "High-numerical-aperture 193-nm exposure tool", Proc. SPIE 4346, Optical Microlithography XIV, (14 September 2001); doi: 10.1117/12.435758; https://doi.org/10.1117/12.435758


EUV High NA scanner and mask optimization for sub 8...
Proceedings of SPIE (November 15 2015)
EUV high NA scanner and mask optimization for sub 8nm...
Proceedings of SPIE (March 17 2016)
Challenges for the 100-nm node
Proceedings of SPIE (September 13 2001)
Tuning MEEF for CD control at 65 nm node based...
Proceedings of SPIE (December 26 2002)

Back to Top