Translator Disclaimer
31 August 2001 Characterization of the WISP array performance in ambient and cryogenic operating environments
Author Affiliations +
Abstract
The Kinetic Kill Vehicle Hardware-In-the-Loop Simulator, located at Eglin AFB, has developed the capability to perform broadband 2-color testing of guided missile seekers in both ambient and cryogenic environments. The 2-color capability is provided by optically combining two 512 X 512 resistor arrays and projecting through all-reflective optical systems. This capability has raised the following questions: `How would a resistor array, designed to work at ambient conditions, perform when operated in a cryogenic environment?' and `How would a resistor array that was non- uniformity corrected (NUC) at ambient conditions perform when the NUC is applied to the array in a cryogenic environment?' The authors will attempt to address these questions by performing several measurements on a Wideband Infrared Scene Projector (WISP) Phase III resistor array in both ambient and cryogenic conditions. The WISP array performance will be defined in terms of temporal response, spatial non-uniformity, radiometric and thermal resolution, and radiometric and thermal transfer function.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James R. Kircher, Eric M. Olson, Thomas P. Bergin, and David S. Flynn "Characterization of the WISP array performance in ambient and cryogenic operating environments", Proc. SPIE 4366, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing VI, (31 August 2001); https://doi.org/10.1117/12.438067
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top