Junction formation by hydrogenation for HgCdTe diodes

Keedong Yang; Jong Hwa Choi; Soo Ho Bae; Hee Chul Lee

doi:10.1117/12.445305

10 October 2001 Junction formation by hydrogenation for HgCdTe diodes

Keedong Yang, Jong Hwa Choi, Soo Ho Bae, Hee Chul Lee

Author Affiliations +

Proceedings Volume 4369, Infrared Technology and Applications XXVII; (2001) https://doi.org/10.1117/12.445305
Event: Aerospace/Defense Sensing, Simulation, and Controls, 2001, Orlando, FL, United States

Abstract

Several junction formation methods are known to make HgCdTe photovoltaic devices. Ion implantation is the most popular process, but it needs additional thermal annealing process. In-situ junction formation by several epitaxy techniques is the advanced process, but is still hard to fabricate. In this paper, for the first time, hydrogenation technique for p-to-n type conversion in HgCdTe has been studied to fabricate HgCdTe photovoltaic infrared detector. H₂ plasma generated in an inductively coupled plasma (ICP) system was used to hydrogenate p-type HgCdTe wafer. Using the ICP system, damages given to the HgCdTe wafer could be minimized. Junction depth measured by differential Hall measurement was able to be adjusted from 2μm to 20μm. Hydrogen atom profile was measured by secondary ion mass spectroscopy (SIMS) and doping profile was measured by differential Hall measurement. Similar depth profile was found between the hydrogen profile and doping profile. It suggests the diffused hydrogen atom is the source of the type conversion. Several experiments were also taken with vacancy-doped and gold-doped p-type HgCdTe wafers. Type conversion was observed only in vacancy doped HgCdTe wafer, not in gold-doped HgCdTe wafer. This means that junction formation by hydrogenation is not due to the damage by the hydrogen plasma, but due to the diffusion of the hydrogen atoms. By applying the hydrogenation process to vacancy-doped wafers, LWIR diodes were successfully fabricated. Current-voltage (I-V) characteristics of hydrogenated Hg_0.79Cd_0.21Te diodes were also measured. Average RoA products of these diodes were about 50 Ω cm². Device uniformity and stability were also tested. The characteristics of the hydrogenated devices did not changed under the baking condition of 80°C over 10 days.

Citation Download Citation

Keedong Yang, Jong Hwa Choi, Soo Ho Bae, and Hee Chul Lee "Junction formation by hydrogenation for HgCdTe diodes", Proc. SPIE 4369, Infrared Technology and Applications XXVII, (10 October 2001); https://doi.org/10.1117/12.445305

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE