Paper
30 April 2001 Novel fabrication process for 3D meander-shaped microcoils in SU-8 dielectric and their application to linear micromotors
Volker Seidemann, Stephanus Buettgenbach
Author Affiliations +
Proceedings Volume 4407, MEMS Design, Fabrication, Characterization, and Packaging; (2001) https://doi.org/10.1117/12.425315
Event: Microelectronic and MEMS Technologies, 2001, Edinburgh, United Kingdom
Abstract
This paper reports on an optimized fabrication process for three dimensional coil structures such as meander or helical coils wound around in plane magnetic structures. The process consists of UV depth lithography employing AZ4562 and SU8 photo resists and electroplating of copper and nickel-iron. Furthermore SU8 is used as the embedding dielectric due to its excellent planarization properties and high structural aspect ratio. Special emphasis was laid on the decrease of via interconnect resistance by electroplating the vias and upper conductors in a single step thus avoiding a large number of resistive interfaces. This was achieved by sacrificial wiring and structured seed layers. The developed technology is applied to a variable reluctance micro motor with a novel design that avoids high friction. The presented concept makes use of a stator traveler configuration generating complementary attraction forces. The technology and design concept is presented and first results are demonstrated.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Volker Seidemann and Stephanus Buettgenbach "Novel fabrication process for 3D meander-shaped microcoils in SU-8 dielectric and their application to linear micromotors", Proc. SPIE 4407, MEMS Design, Fabrication, Characterization, and Packaging, (30 April 2001); https://doi.org/10.1117/12.425315
Lens.org Logo
CITATIONS
Cited by 21 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Magnetism

Dielectrics

Electroplating

Lithography

Resistance

Copper

Teeth

Back to Top