100-nm alternating PSM structure discussion for ArF lithography

Yasutaka Morikawa; Haruo Kokubo; Masami Nara; Hiroyuki Miyashita; Naoya Hayashi

doi:10.1117/12.438342

5 September 2001 100-nm alternating PSM structure discussion for ArF lithography

Yasutaka Morikawa, Haruo Kokubo, Masami Nara, Hiroyuki Miyashita, Naoya Hayashi

Proceedings Volume 4409, Photomask and Next-Generation Lithography Mask Technology VIII; (2001) https://doi.org/10.1117/12.438342
Event: Photomask and Next Generation Lithography Mask Technology VIII, 2001, Kanagawa, Japan

Abstract

Alternating phase-shifting mask (Alt.PSM) technology is the most effective approach to expand resolution limitation and expand the process window of lithography. Currently, etched quartz Alt.PSMs have been introduced not only for device development but also for production use. Adapting the etched quartz structure, we need to consider about transmission difference between etched and un-etched regions. So, side-etching method has been used for structure of Alt.PSMs. We have been supplying Alt.PSMs with side-etching and single trench structures for the mass-production of KrF lithography. As design rule of device pattern have been tightening, in 100nm node and further, narrow chrome width limits the undercut width and which should be optimized for ArF lithography. Moreover, proximity effect has been reported for the shifter edge type Alt.PSMs as pitch dependency of printed line CD. We will report about the side-etching optimization whether limited undercut width can compensate the CD imbalance between etched and un-etched regions. Or, how much bias adding at space width of etched regions can compensate it, or how undercut and space biasing combination affect CD imbalance. We also discuss about whether the line bias can correct to targeted line CD. Finally, we will summarize which structure is recommended for 100nm-node Alt.PSM for ArF lithography. On the other hand, for the case the undercut structure turns out to be difficult in the 100nm-Alt.PSM manufacturing, we will report preliminary manufacturing results of the new structure.

Citation Download Citation

Yasutaka Morikawa, Haruo Kokubo, Masami Nara, Hiroyuki Miyashita, and Naoya Hayashi "100-nm alternating PSM structure discussion for ArF lithography", Proc. SPIE 4409, Photomask and Next-Generation Lithography Mask Technology VIII, (5 September 2001); https://doi.org/10.1117/12.438342

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
15 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Quartz

Reticles

Lithography

Dry etching

Etching

Cadmium

Semiconducting wafers

Show All Keywords

Keywords/Phrases

Search In:

Publication Years