25 February 2002 Diagnostics and real-time monitoring of pulsed laser ablation
Author Affiliations +
Proceedings Volume 4426, Second International Symposium on Laser Precision Microfabrication; (2002) https://doi.org/10.1117/12.456861
Event: Second International Symposium on Laser Precision Micromachining, 2001, Singapore, Singapore
Abstract
Signal generation, diagnostics and real-time monitoring during pulsed laser ablation of solid materials (silicon, metal and IC molding component) are investigated. It is found that there is rich signal emission in the laser ablation. Wide band microphone, ultrafast phototube and tiny metal probe are applied to detect acoustic, optical and electric signals generated during the laser ablation. Optical emission spectrum analyzer and high-speed ICCD photography are used to study laser-ablation-induced plasma dynamics. Signal variation with laser processing conditions during the laser ablation is analyzed. Formation of the signals is also discussed and modeled. Based on the signal diagnostics and analyses, relations between signal characteristic parameters and the laser processing conditions can be established for different applications of laser ablation in industry.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ming Hui Hong, Yongfeng Lu, Tow Chong Chong, "Diagnostics and real-time monitoring of pulsed laser ablation", Proc. SPIE 4426, Second International Symposium on Laser Precision Microfabrication, (25 February 2002); doi: 10.1117/12.456861; https://doi.org/10.1117/12.456861
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

Steam-assisted laser ablation of metal substrate
Proceedings of SPIE (February 25 2002)
Laser ablation of Si in water and ambient air
Proceedings of SPIE (February 25 2002)
Cleaning of large area by excimer laser ablation
Proceedings of SPIE (January 14 2000)

Back to Top