25 February 2002 Influence of laser fluence and laser repetition rate on the synthesis of aluminium nitride thin films by nitrogen-ion-assisted pulsed laser deposition
Author Affiliations +
Proceedings Volume 4426, Second International Symposium on Laser Precision Microfabrication; (2002) https://doi.org/10.1117/12.456845
Event: Second International Symposium on Laser Precision Micromachining, 2001, Singapore, Singapore
Abstract
Aluminum nitride (AIN) thin films have been grown on Si(111) and Al2O3(001) substrates by pulsed KrF excimer laser (wavelength 248nm, duration 30ns) ablation of AIN target with assistance of nitrogen ion beam bombardment. The influence of process parameters such as laser fluence and laser repetition rate has been investigated to obtain high quality AIN films. The XRD spectra of AIN films on Si(111) and Al2O3(001) substrates yield full-width-half- maximum (FWHM) values of approximately 2.1-1.7 degree(s). The chemical composition of the films is characterized by X-ray photoelectron spectroscopy (XPS). The surface morphology of the films is measured by atomic force microscope (AFM). Al2O3(0001) substrate shows better matching with the AIN films since highest crystallite size can be achieved among the different type of substrates evaluated. Better quality AIN films (with bigger crystallite size) can be achieved with higher laser fluence of 6J/cm2 and an optimum laser repetition rate 7Hz.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yeow Whatt Goh, Yeow Whatt Goh, Yongfeng Lu, Yongfeng Lu, ZhongMin Ren, ZhongMin Ren, Tow Chong Chong, Tow Chong Chong, } "Influence of laser fluence and laser repetition rate on the synthesis of aluminium nitride thin films by nitrogen-ion-assisted pulsed laser deposition", Proc. SPIE 4426, Second International Symposium on Laser Precision Microfabrication, (25 February 2002); doi: 10.1117/12.456845; https://doi.org/10.1117/12.456845
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

Pulsed-laser deposition of carbon nitride materials
Proceedings of SPIE (February 25 2002)
Pulsed laser deposition of phosphor nitride thin films
Proceedings of SPIE (June 14 2000)
Fabrication of nitride thin films from laser plasma
Proceedings of SPIE (April 24 2003)
Pulsed-laser deposition of AlN thin films
Proceedings of SPIE (June 07 2000)

Back to Top