Paper
29 June 2001 Low-temperature growth of high-quality indium tin oxide thin films by ultraviolet-assisted pulsed laser deposition
Valentin Craciun, Doina Craciun, Z. Chen, J. Hwang, Rajiv K. Singh
Author Affiliations +
Proceedings Volume 4430, ROMOPTO 2000: Sixth Conference on Optics; (2001) https://doi.org/10.1117/12.432854
Event: ROMOPTO 2000: Sixth Conference on Optics, 2000, Bucharest, Romania
Abstract
Indium tin oxide (ITO) films were grown on (100) Si and Corning glass substrates by an in situ ultraviolet-assisted pulsed laser deposition (UVPLD) technique. The most important deposition parameter for the growth of high transparent and conductive ITO films was found to be the oxygen pressure used during the deposition. Films grown under low oxygen pressure were brown and exhibited low optical transmittance and high resistivity. For a target- substrate distance of 10.5 cm, which ensured a uniform film across 2.5 cm, the optimum oxygen pressure to obtain the lowest electrical resistivity was found to be around 10 mTorr. For higher oxygen pressures, the optical transmittance was a little bit higher but a significant increase of the electrical resistivity was noticed. X-ray photoelectron spectroscopy showed that ITO films grown in the 5-20 mTorr range were fully oxidized, without any measurable metallic content. Films grown at room temperature were amorphous regardless of the oxygen pressure used.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Valentin Craciun, Doina Craciun, Z. Chen, J. Hwang, and Rajiv K. Singh "Low-temperature growth of high-quality indium tin oxide thin films by ultraviolet-assisted pulsed laser deposition", Proc. SPIE 4430, ROMOPTO 2000: Sixth Conference on Optics, (29 June 2001); https://doi.org/10.1117/12.432854
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxygen

Tin

Oxides

Refractive index

Transmittance

Indium

Pulsed laser deposition

Back to Top