30 October 2001 Novel methods of intracavity beam shaping
Author Affiliations +
Methods of shaping laser beams within the laser resonator are studied. The simplest form of shaping is the spatial mode generation inherent in the laser cavity due to the geometry of the resonator in conjunction with gain to compensate for roundtrip losses, such as diffraction and output coupling. Typically the fundamental mode or multimode behavior is exhibited from such configurations. Passive mode shaping can be accomplished by introducing static amplitude or phase masks. An example of an amplitude mask is provided in order to generate a higher-order spatial mode. Active mode shaping can be accomplished by altering the optical pump distribution. This case is studied experimentally with a diode-end-pumped Nd:YVO4 laser and compared to modeling of expected Hermite-Gaussian mode generation. Active mode shaping allows the preferred mode distribution to be altered in real time. Additional shaping can be done following the resonator to modify a Hermite-Gaussian mode into a pseudo-Laguerre-Gaussian mode. This work also shows that using the coherent propagation method of Gaussian beam decomposition is capable of modeling and describing intracavity beam shaping.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. John Koshel, "Novel methods of intracavity beam shaping", Proc. SPIE 4443, Laser Beam Shaping II, (30 October 2001); doi: 10.1117/12.446753; https://doi.org/10.1117/12.446753


Intra-cavity flat-top beam generation
Proceedings of SPIE (August 21 2009)
Intra-cavity decomposition of a dual-directional laser beam
Proceedings of SPIE (February 18 2011)
Resonators for high-power lasers
Proceedings of SPIE (December 22 1998)
Binary optical resonator with flattop output
Proceedings of SPIE (August 27 1999)
Mode control in annular resonators
Proceedings of SPIE (May 13 1998)
Higher-order Gaussian beams: new achievements
Proceedings of SPIE (September 24 2004)

Back to Top