21 February 2002 Theoretical analysis of composite polymer solar cell function
Author Affiliations +
Abstract
Published information on polymer composite solar cells was screened to pin down the most critical parameters for a further improvement of these photovoltaic systems towards higher efficiency and stability. Largely irreversible separation of photocharge between the polymer (e.g. PPV) and the fullerene with subsequent percolation of electrons (e.g. to the Al contact) and holes (to the ITO contact), under the symmetry breaking influence of an electric field imposed by the work function difference of the contacts (Al and ITO respectively) accounts for photocurrent generation. The energetics is determined by n-p hetero junction, which is formed between ITO and the polymer/fullerene composite. Positive polarization of the ITO contact leads to the generation of an interfacial potential drop and an increase of the effective ITO work function. This explains the generation of a photovoltage reaching more than 0.8 Volt. Parameters limiting solar cell performance are discussed.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vladimir M. Aroutiounian, Vladimir M. Aroutiounian, Helmut Tributsch, Helmut Tributsch, } "Theoretical analysis of composite polymer solar cell function", Proc. SPIE 4465, Organic Photovoltaics II, (21 February 2002); doi: 10.1117/12.456938; https://doi.org/10.1117/12.456938
PROCEEDINGS
12 PAGES


SHARE
Back to Top