27 November 2001 Surface landmine and trip-wire detection using calibrated polarization measurements in the LWIR and SWIR
Author Affiliations +
Abstract
Polarization measurements in the IR region are useful for the detection of man-made objects in natural environment. Surface laid landmines are examples of man-made objects that are difficult to detect, especially when a certain time have elapsed. As time goes by, both IR signature and degree of polarization are reduced, due to the dust coverage and the grass that has grown around the mines. Polarization measurements are useful when detecting Trip Wires. This article reports the results of IR polarization measurements compared to the measurements without a polarizing element. To simulate the dust and grasses that can cover the mines, a series of controlled covers are constructed. Measurements on this series are performed, and the results are shown in a diagram of relative Degree of Linear Polarization, (DoLP) as a function of coverage. The same is done for the case without a polarizer but here the relative radiance is shown. By comparing the two diagrams a measure is achieved of how effective the polarization measurements are with respect to the case without a polarizer. A simple parameter model of the coverage has been made and has been compared with the measurements. Measurements indicate that detection of trip wire is improved when using polarization measurements.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Goeran Forssell, "Surface landmine and trip-wire detection using calibrated polarization measurements in the LWIR and SWIR", Proc. SPIE 4491, Subsurface and Surface Sensing Technologies and Applications III, (27 November 2001); doi: 10.1117/12.450185; https://doi.org/10.1117/12.450185
PROCEEDINGS
11 PAGES


SHARE
Back to Top