14 November 2001 Synchrotron radiation optics: quality demands and technical achievability
Author Affiliations +
The optics metrology laboratory of Sincrotrone Trieste is operating some non-contact interferometers since 1992, in order to characterise slope errors, figure deviations and surface roughness for synchrotron radiation optics (SR) up to 1.4 metres in length, prior to their installation at the beamlines. During these years, prompted by the increasing needs of experimentalists, the requirements for FEL and SR optical components have become more and more severe. We will review here the history of our measurements during the last nine years, comparing the match between the given specifications and measured optical quality of the delivered items. We will also illustrate which has been the evolution of the main optical concepts, that has ultimately boosted the suppliers to develop machining and testing methods to a novel level of accuracy.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Giovanni Sostero, Anna Bianco, Marco Zangrando, Daniele Cocco, "Synchrotron radiation optics: quality demands and technical achievability", Proc. SPIE 4501, X-Ray Mirrors, Crystals, and Multilayers, (14 November 2001); doi: 10.1117/12.448490; https://doi.org/10.1117/12.448490


Study on high-precision measurement of long radius of curvature
Proceedings of SPIE (September 27 2016)
Elliptical concave surface test
Proceedings of SPIE (October 15 2012)
Metrology of a mirror at the Advanced Photon Source ...
Proceedings of SPIE (November 13 1998)
Stylus profilometry of large optics
Proceedings of SPIE (November 01 1990)

Back to Top