Investigation of the electronic properties of cadmium zinc telluride surfaces using pulsed laser microwave cavity perturbation

Gary C. Tepper; Royal Kessick; Csaba Szeles

doi:10.1117/12.450744

18 December 2001 Investigation of the electronic properties of cadmium zinc telluride surfaces using pulsed laser microwave cavity perturbation

Gary C. Tepper, Royal Kessick, Csaba Szeles

Author Affiliations +

Proceedings Volume 4507, Hard X-Ray and Gamma-Ray Detector Physics III; (2001) https://doi.org/10.1117/12.450744
Event: International Symposium on Optical Science and Technology, 2001, San Diego, CA, United States

Abstract

The spectroscopic performance of cadmium zinc telluride (CZT) room temperature radiation detectors is currently limited by both bulk and surface imperfections introduced during the growth, harvesting and fabrication of these devices. Bulk imperfections including impurities, vacancies, interstitials, grain boundaries and dislocations have been relatively well studied and are known to trap charge and reduce detector performance. However, the effect of specific traps on the electronic decay process has been difficult to quantify. Surface imperfections including mechanical damage or adsorbed chemical species are also known to trap charge or increase leakage current, but it has proven difficult to characterize the electronic properties of CZT surfaces prior to electrode deposition. Here it is shown that the pulsed laser microwave cavity perturbation method can provide important information on the electronic decay process both in the bulk and at the surface of high pressure Bridgman CZT crystals. Electronic decay process both in the bulk and at the surface of high pressure Bridgman CZT crystals. Electronic decay time was measured as a function of temperature and surface conditions. It is shown that the electronic decay process in bulk CZT is consistent witha single deep hole trap at an energy between 600meV and 700meV. The effect of surface quality was resolved by analyzing distinct features in the photoconductivity decay curves. Atomic force microscopy was used to characterize the surface roughness. Rough or damaged surfaces exhibited persistent photoconductivity, which could be eliminated by etching with a bromine methanol solution.

Citation Download Citation

Gary C. Tepper, Royal Kessick, and Csaba Szeles "Investigation of the electronic properties of cadmium zinc telluride surfaces using pulsed laser microwave cavity perturbation", Proc. SPIE 4507, Hard X-Ray and Gamma-Ray Detector Physics III, (18 December 2001); https://doi.org/10.1117/12.450744

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available