8 November 2001 Loss mechanisms in supermirror neutron guides
Author Affiliations +
Supermirror neutron guides have become a standard solution to transport neutrons from the source to the instruments. The performance of the guides depends strongly on the reflectivity of the coating, the waviness of the substrate, and the alignment of the guide elements. We have performed Monte Carlo simulations in order to quantify these influences for non-perfect, real neutron guides and to compare the importance of the different loss mechanisms. The importance of a good reflectivity was demonstrated in previous publications and is supported by our investigations. We show that the waviness of the substrate can easily be compensated by increasing the critical angle of reflection without degrading the divergence of the outgoing neutron beam. For geometrical imperfections such as off-sets of the individual guide elements or deviations from an exact rectangular guide cross section, the degradation of the neutron flux at the end of a neutron guide corresponds roughly to the proportion of the cross section affected by these imperfections to the total guide cross section.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter M. Allenspach, Peter M. Allenspach, Peter Boeni, Peter Boeni, Kim Lefmann, Kim Lefmann, } "Loss mechanisms in supermirror neutron guides", Proc. SPIE 4509, Neutron Optics, (8 November 2001); doi: 10.1117/12.448070; https://doi.org/10.1117/12.448070


Supermirror neutron guide
Proceedings of SPIE (November 22 1992)
Approaches to improving energy yield from PV modules
Proceedings of SPIE (August 18 2010)
Ways that designers and fabricators can help each other
Proceedings of SPIE (December 31 1990)

Back to Top