Figure of merit and fundamental range limitations in surface sensing direct-detection mid-infrared random-modulation continuous-wave lidar

Adam Rybaltowski; Allen Taflove

doi:10.1117/12.453997

23 January 2002 Figure of merit and fundamental range limitations in surface sensing direct-detection mid-infrared random-modulation continuous-wave lidar

Adam Rybaltowski, Allen Taflove

Author Affiliations +

Proceedings Volume 4546, Laser Radar: Ranging and Atmospheric Lidar Techniques III; (2002) https://doi.org/10.1117/12.453997
Event: International Symposium on Remote Sensing, 2001, Toulouse, France

Abstract

We perform maximum range calculations for surface sensing direct-detection mid-infrared Random-Modulation Continuous- Wave (RM-CW) lidar, and propose a system's figure of merit. In this type of lidar, noise can be additive and determined by detector's noise given by its specific detectivity D, area, and integration time. Fundamental limits of the sensing range are then imposed by diffraction, provided that the Background-Limited Infrared Photodetection (BLIP) limit (controlled by the field-of-view) is not exceeded. There is no dependence on a specific pseudorandom code (PRC) used since noise spectral density is assumed to be independent of frequency. Under most favorable conditions, including no losses due to optics or atmospheric attenuation, an object of angularly uniform unity reflectance and size not less than the laser beam can be detected within 1s with a 20-cm diameter telescope and a signal-to-noise ratio of one from a distance of about 200 km if a cooled detector and a laser emitting 500 mW cw at 5 micrometers are used. For an integration time of 0.1 ms (which is well below a typical atmospheric correlation time), or a room-temperature detector, the maximum range reduces to about 20 km. As the technology of Quantum-Cascade lasers (QCLs) advances, the maximum range of several tens of kilometers can be expected in this type of lidar with all-thermoelectrically-cooled semiconductor components, and, perhaps after some modifications in the technique, about 1 km with all-room-temperature components.

Citation Download Citation

Adam Rybaltowski and Allen Taflove "Figure of merit and fundamental range limitations in surface sensing direct-detection mid-infrared random-modulation continuous-wave lidar", Proc. SPIE 4546, Laser Radar: Ranging and Atmospheric Lidar Techniques III, (23 January 2002); https://doi.org/10.1117/12.453997

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available