2 October 2001 Transfer of micro-optical structures into GaAs and diamond
Author Affiliations +
Proceedings Volume 4561, MOEMS and Miniaturized Systems II; (2001) https://doi.org/10.1117/12.443080
Event: Micromachining and Microfabrication, 2001, San Francisco, CA, United States
Transfer of continuous-relief micro-optical structures from resist into GaAs, by use of direct-write electron-beam lithography followed by dry etching in an inductively coupled plasma, is demonstrated. A BCl3/Ar chemistry has been found to give satisfactory results, N2 and Cl2 have been added to change the selectivity between GaAs and e-beam resist. The transfer process generates smooth etched structures. Distortion of the diffractive structures in the transfer process has been examined. Blazed gratings with a period of 10 micrometers have been optically evaluated using a 940 nm VCSEL. The diffraction efficiency was 67% in the first order with a theoretical value of 87%. Also, simulations of the optical performance for the transfered diffractive elements have been made using Fourier transform of the grating profile. For integrating the optical element with VCSELs there are several possible alternatives. We have fabricated the optical structure on the same substrate that is used for the VCSEL and characterization is presently under way. We also show our initial results on transfer of micro-optical structures from resist into diamond using dry etching.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mikael Karlsson, Mikael Karlsson, Fredrik K. Nikolajeff, Fredrik K. Nikolajeff, "Transfer of micro-optical structures into GaAs and diamond", Proc. SPIE 4561, MOEMS and Miniaturized Systems II, (2 October 2001); doi: 10.1117/12.443080; https://doi.org/10.1117/12.443080

Back to Top