11 March 2002 Mask-related distortions of modified fused silica reticles for 157-nm lithography
Author Affiliations +
Abstract
Extending 157-nm lithography to the 70 nm node will be a difficult challenge due to the stringent requirements on image placement accuracy. At the University of Wisconsin Computational Mechanics Center, numerical and experimental studies are being conducted to investigate materials, fabrication processing, and system parameters necessary to achieve the required overlay error budget. This paper provides our latest results for 157-nm reticles, including the photomask / pellicle system. Mask blank fabrication and pattern transfer effects were simulated utilizing three-dimensional finite element (FE) structural models. The pattern-specific in-plane distortions (IPD) induced by each fabrication process step have been determined using the IBM Nighteagle / Falcon layout. To complete the static structural analysis, the effects of bonding a pellicle were also identified. The thermomechanical response of reticles during e-beam patterning and exposure were evaluated utilizing FE heat transfer models. Results from e-beam writing simulations indicate that transient thermal distortions from patterning the Nighteagle / Falcon design are not critical. However, under high throughput conditions, the IPD induced during scanning exposure can become relatively large. The simulation results provide an indication of the total overlay error budget to be expected, and demonstrate the importance of using predictive models to optimize mask system performance in a cost-effective manner.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew R. Mikkelson, Amr Y. Abdo, Eric P. Cotte, Jaewoong Sohn, Roxann L. Engelstad, Edward G. Lovell, "Mask-related distortions of modified fused silica reticles for 157-nm lithography", Proc. SPIE 4562, 21st Annual BACUS Symposium on Photomask Technology, (11 March 2002); doi: 10.1117/12.458256; https://doi.org/10.1117/12.458256
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Mechanical distortions in advanced optical reticles
Proceedings of SPIE (June 25 1999)
157-nm technology: Where are we today?
Proceedings of SPIE (July 30 2002)
157 nm lithography for 100 nm generation and beyond ...
Proceedings of SPIE (January 22 2001)
Hard pellicle study for 157-nm lithography
Proceedings of SPIE (August 01 2002)
Current status of 157-nm mask technology development
Proceedings of SPIE (July 19 2000)

Back to Top