4 October 2001 Fiber collimator arrays for optical devices/systems
Author Affiliations +
Proceedings Volume 4564, Optomechatronic Systems II; (2001) https://doi.org/10.1117/12.444084
Event: Intelligent Systems and Advanced Manufacturing, 2001, Boston, MA, United States
Abstract
New single-mode fiber collimator arrays (FCAs) were designed, assembled, and tested at a wavelength of 1550 nm. For FCAs using an 8-channel GRIN planar microlens array with a pitch of 250 μm and a focal length of 0.7 mm, the insertion loss was 0.5 dB with uniformity of 0.12 dB, at a collimator separation of 10 mm. The crosstalk from the other channels was less than -45 dB and the return loss of each channel was > 60 dB. For FCAs using a 6-channel lens array by fixing GRIN rod lenses into a V-groove array, the insertion loss was less than 0.5 dB at a collimator separation of 100 mm. By analyzing formulas for calculating Gaussian beam propagation for the design, some simple and useful formulas were introduced for calculating the size and position of the beam waist from those of its image, and for calculating the maximum collimator separation with efficient coupling.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
X. Frank Zhu, X. Frank Zhu, Yoshiro Sato, Yoshiro Sato, Yasuji Sasaki, Yasuji Sasaki, Kenjiro Hamanka, Kenjiro Hamanka, } "Fiber collimator arrays for optical devices/systems", Proc. SPIE 4564, Optomechatronic Systems II, (4 October 2001); doi: 10.1117/12.444084; https://doi.org/10.1117/12.444084
PROCEEDINGS
8 PAGES


SHARE
Back to Top