22 February 2002 FT-IR interferogram signal processing for uniform-time sampling
Author Affiliations +
Proceedings Volume 4577, Vibrational Spectroscopy-based Sensor Systems; (2002) https://doi.org/10.1117/12.455729
Event: Environmental and Industrial Sensing, 2001, Boston, MA, United States
Abstract
A new approach to Fourier transform-infrared (FT-IR) signal acquisition and processing has been developed recently. This approach relies on digital signal processing (DSP) and enables the use of sigma-delta analog-to-digital converters (ADCs). Data are simultaneously oversampled from both the infrared (IR) and reference laser channels at uniform time intervals. This approach contrasts sharply with the traditional method, in which reference channel zero-crossings are used to trigger ADC sampling of the IR channel at equal increments of optical path difference (OPD). In one embodiment of the new approach, data from the laser channel are processed to values of mirror position. These data can be used to interpolate the IR signal. The uniform time sampling method shifts instrument complexity from hardware to software, while improving the spectral accuracy by fully correcting the effects of optical velocity variation. The correction is sufficient even with a sinusoidal variation in the optical retardation rate. This study demonstrates the approach using the Lomb-Scargle periodogram.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christopher J. Manning, Roger J. Combs, "FT-IR interferogram signal processing for uniform-time sampling", Proc. SPIE 4577, Vibrational Spectroscopy-based Sensor Systems, (22 February 2002); doi: 10.1117/12.455729; https://doi.org/10.1117/12.455729
PROCEEDINGS
8 PAGES


SHARE
Back to Top