Paper
19 October 2001 Design and fabrication of 1x4 waveguide power splitter with organic-inorganic material
Zhanjia Hou, Liying Liu, Jieyun Yan, Lei Xu, Wencheng Wang, Fuming Li
Author Affiliations +
Proceedings Volume 4579, Optical Fiber and Planar Waveguide Technology; (2001) https://doi.org/10.1117/12.444869
Event: Asia-Pacific Optical and Wireless Communications Conference and Exhibit, 2001, Beijing, China
Abstract
The organic-inorganic waveguide fabrication procedure is studied with sol-gel technology. Channel waveguide and 1x4 power splitter were fabricated. The propagation loss is about 0.5dB/cm for channel waveguide. Silicon V-groove was fabricated and it is easy to position fiber to simplify the process for coupling between fiber and waveguide. The fiber was glued to the input side of waveguide. The insertion loss is about 9dB.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhanjia Hou, Liying Liu, Jieyun Yan, Lei Xu, Wencheng Wang, and Fuming Li "Design and fabrication of 1x4 waveguide power splitter with organic-inorganic material", Proc. SPIE 4579, Optical Fiber and Planar Waveguide Technology, (19 October 2001); https://doi.org/10.1117/12.444869
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Channel waveguides

Silicon

Refractive index

Photomicroscopy

Zirconium

Ultraviolet radiation

RELATED CONTENT

Er-doped hybrid sol-gel materials
Proceedings of SPIE (October 27 1999)
Thick hybrid silica zirconia sol gel film for single step...
Proceedings of SPIE (February 24 2006)

Back to Top