21 November 2001 State of commercialization of MEMS: present and future prospects
Author Affiliations +
Abstract
MEMS/MST technology was introduced over twenty years ago embellished by visions and promises of new products and applications that would revolutionize our lives. As a result we witnessed the creation of many new companies whose goal was to commercialize the technology. However, a few years later commercialization of the technology turned out to be an agonizingly process, a reaction attributed to the overestimation of the speed of technology transfer. This was further complicated by the fact that MEMS, while an enabling technology, is also a disruptive technology destined to completely replace existing, well proven familiar solutions. The adoption of new technology often requires marked evidence of superiority before displacing an established technology. As a rule of thumb, one needs to see a fivefold advantage in some parameters of importance, such as performance and cost, before there is any likelihood of adoption. Several MEMS devices have emerged that evolved into a significant commercial realization. Several others appear to be on the threshold of commercial success. The characteristics of some of these MEMS devices will be examined along with the major players and a number of issues related to overcoming the roadblocks of commercialization. We will also offer some predictions for the future of this technology.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alex Hariz, Alex Hariz, } "State of commercialization of MEMS: present and future prospects", Proc. SPIE 4591, Electronics and Structures for MEMS II, (21 November 2001); doi: 10.1117/12.449172; https://doi.org/10.1117/12.449172
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Providing technology infrastructure for MEMS
Proceedings of SPIE (March 10 1999)
Critical point drying and cleaning for MEMS technology
Proceedings of SPIE (August 18 1999)
Status of the MEMS industry
Proceedings of SPIE (January 22 2005)
European MEMS foundries
Proceedings of SPIE (January 15 2003)
MEMS in Singapore
Proceedings of SPIE (March 16 2001)

Back to Top