Translator Disclaimer
21 November 2001 Copper microcoil arrays for the actuation of optical matrix microswitches
Author Affiliations +
Copper micro-coil arrays have been designed and realized by electroplating for the actuation of arrays of optical matrix micro-switches. The good operation of the micro-switches needs large force that is well fulfilled by the electromagnetic actuation of copper micro-coils. The electromagnetic behavior of the actuator has been examined using the simulator FLUX2DTM and an optimized configuration of ferromagnetic materials was determined. Arrays of micro-coils with high aspect ratio have been achieved with the use of SU8 resin mould. The diameters of micro-coils range from 0.5 millimeters to 4 millimeters with thickness of about 30 micrometers and few tens of turns. Electric measurements have been done in order to characterize the micro-coils.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lionel Houlet, Gilbert Reyne, Tetsuhiko Iizuka, Tarik Bourouina, Elizabeth-Dufour Gergam, and Hiroyuki Fujita "Copper microcoil arrays for the actuation of optical matrix microswitches", Proc. SPIE 4592, Device and Process Technologies for MEMS and Microelectronics II, (21 November 2001);


Long-range translation actuator
Proceedings of SPIE (March 15 2000)
Scanning micromirrors: an overview
Proceedings of SPIE (October 25 2004)

Back to Top