Paper
30 October 2001 Properties of PT/P(VDF-TrFE) pyroelectric sensor based on porous SiO2 substrate
Jinhua Li, Ningyi Yuan, Helen L.W. Chan, Chung-Loong Choy
Author Affiliations +
Proceedings Volume 4596, Advanced Photonic Sensors and Applications II; (2001) https://doi.org/10.1117/12.447360
Event: International Symposium on Photonics and Applications, 2001, Singapore, Singapore
Abstract
Nanosized lead titanate (PT) powder obtained by the Sol-gel method was homogeneously mixed with vinylidene fluoride-trifluoroethylene[P(VDF-TrFE)]. The nanocomposite film was used as the sensing film of PT/P(VDF-TrFE) pyroelectric sensors, whose detective merit was about 20% higher than that of sensors using pure P(VDF-TrFE). Porous silicon with porosity of 69% prepared by electrochemical method was oxidized to porous SiO2 in wet oxygen. Such porous SiO2 was chosen as substrate, which can effectively decrease the heat loss due to condition of the substrate. The voltage responsivity was increased and the thermal fluctuation noise of the pyroelectric element was decreased significantly. The experimental results indicated the specific detectivity of PT/P(VDF-TrFE) pyroelectric sensors based on porous SiO2 substrate was nearly 2 orders of magnitude higher than that of the sensors on bulk SiO2 substrate formed under the same conditions.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinhua Li, Ningyi Yuan, Helen L.W. Chan, and Chung-Loong Choy "Properties of PT/P(VDF-TrFE) pyroelectric sensor based on porous SiO2 substrate", Proc. SPIE 4596, Advanced Photonic Sensors and Applications II, (30 October 2001); https://doi.org/10.1117/12.447360
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Silicon

Ceramics

Composites

Silica

Particles

Dielectrics

Back to Top