Paper
15 October 2001 Phase detection scheme of vibratory gyroscope by 2D driving operation
Heng Yang, Minhang Bao, Hao Yin, Shaoqun Shen, Bin Xiong
Author Affiliations +
Proceedings Volume 4601, Micromachining and Microfabrication Process Technology and Devices; (2001) https://doi.org/10.1117/12.444696
Event: International Symposium on Optoelectonics and Microelectronics, 2001, Nanjing, China
Abstract
Conventionally, a one-dimensional vibratory gyroscope is excited into vibration int the x-direction and detection is made for an angular rate around the z-axis by measuring the induced vibration in the y-direction. Proposed in this paper is a novel operation mode. In this operation mode, excitation is made in both the x- and y-directions and the angular rate around the z-axis causes the phase variation of the vibrations. Therefore, the angular rate signal can be detected by measuring the phase change of the output signal of the gyroscope in one of the directions. This operation scheme features high accuracy, high immunity against interference and low temperature coefficient. A bulk micromachined gyroscope with piezoresistive sensing elements is used as a test carrier for the two-dimensional excitation operation and phase detection scheme. Experimental results are presented.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Heng Yang, Minhang Bao, Hao Yin, Shaoqun Shen, and Bin Xiong "Phase detection scheme of vibratory gyroscope by 2D driving operation", Proc. SPIE 4601, Micromachining and Microfabrication Process Technology and Devices, (15 October 2001); https://doi.org/10.1117/12.444696
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top