Translator Disclaimer
16 October 2001 Design of multichannel parallel data transmission optical link
Author Affiliations +
Proceedings Volume 4603, Fiber Optics and Optoelectronics for Network Applications; (2001)
Event: International Symposium on Optoelectonics and Microelectronics, 2001, Nanjing, China
In this paper, high-density and large-capacity parallel data reliable transmission has been accomplished in high electro-magnetic interference environments via virtual- parallel optical transmission technique. Through time division multiplexing (TDM), all the parallel data signals and control signals are converted to high-speed serial data stream. Each bit is transmitted in a time slot during a frame period Thus, the parallel signals can be transmitted using only one opto-electronic device. Each optical transmission channel consists of two optical fibers, can achieve full-duplex transmission of 24 bits parallel signals. The maximum frame rate is 75 MHz. This data transmission card can be expanded to 6 channels, has a maximum data throughput of 15 Gbps. This optical data transmission link can work properly for a wide range of supply voltage. When the supply power voltage varied from 4.2 to 7.0 volts, the bit error rate (BER) is still below 10E-12.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wencai Jing, Ge Zhou, Haifeng Li, Zhaohui Li, Yuxiu Deng, Hongxia Zhang, and Yimo Zhang "Design of multichannel parallel data transmission optical link", Proc. SPIE 4603, Fiber Optics and Optoelectronics for Network Applications, (16 October 2001);

Back to Top