Frequency response of current modulation induced polarization switching in VCSELs

Guy Verschaffelt; Jan Albert; Krassimir P. Panajotov; Bob Nagler; Michael Peeters; Hugo Thienpont; Irina P. Veretennicoff; Jan Danckaert; Sylvain Barbay; Giovanni Giacomelli; Francesco Marin

doi:10.1117/12.469240

4 June 2002 Frequency response of current modulation induced polarization switching in VCSELs

Guy Verschaffelt, Jan Albert, Krassimir P. Panajotov, Bob Nagler, Michael Peeters, Hugo Thienpont, Irina P. Veretennicoff, Jan Danckaert, Sylvain Barbay, Giovanni Giacomelli, Francesco Marin

Author Affiliations +

Proceedings Volume 4649, Vertical-Cavity Surface-Emitting Lasers VI; (2002) https://doi.org/10.1117/12.469240
Event: Symposium on Integrated Optoelectronic Devices, 2002, San Jose, California, United States

Abstract

We present an experimental and rate-equation based theoretical study of the current-driven polarization modulation properties of VCSELs. In such lasers a high-contrast polarization flip is often observed at a particular value of the pump current. When modulating the current around the polarization switching value, we measure the critical modulation amplitude necessary to force synchronized back-and-forward polarization flips, as a function of the modulation frequency. This yields the polarization modulation frequency response. For a proton-implanted VCSEL the shape of the measured response curve is characterized by time constants that are very long compared with the usual time scales of laser dynamics (such as photon and carrier lifetimes), and compatible with the measured thermal relaxation time. Indeed, both the polarization modulation and the thermal frequency response curves show a cut-off frequency of about 90kHz, independent of the particular value of the switching current. In the frequency response curve of an air-post VCSEL one clearly sees remnants of the thermal influence on the switching. However, one cannot say that a thermal cut-off inhibits polarization switching above a certain modulation frequency. Notwithstanding the difference in impact of thermal effects depending on the type of device under study, our results indicate that it is necessary to incorporate a temperature-dependent variable in realistic models describing the dynamical polarization properties of VCSELs.

Citation Download Citation

Guy Verschaffelt, Jan Albert, Krassimir P. Panajotov, Bob Nagler, Michael Peeters, Hugo Thienpont, Irina P. Veretennicoff, Jan Danckaert, Sylvain Barbay, Giovanni Giacomelli, and Francesco Marin "Frequency response of current modulation induced polarization switching in VCSELs", Proc. SPIE 4649, Vertical-Cavity Surface-Emitting Lasers VI, (4 June 2002); https://doi.org/10.1117/12.469240

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE