23 May 2002 Development of an electro-optical 3D adapter for stereoscopic video recording
Author Affiliations +
Abstract
We describe the development and evaluation of an electro- optical 3D adapter for recording stereoscopic 3D images with a standard video camcorder. The adapter uses a combination of liquid crystal shutters and a half prism to record right and left images in each field of an NTSC signal. The purpose of this study was to develop a simple and usable 3D recording system. We investigated the usability of a conventional -model 3D adapter and examined solutions to the problems we found. This adapter has the following characteristics: 1) The 3D recordings were made using the parallel method. 2) The frame of the adapter does not obstruct light in any part of the images. 3) A correcting lens is used in close-up recordings to equalize the sizes of the right and left images. 4) The vertical disparity of each image is easy to adjust. 5) The base length can be adjusted to between 65mm and 90mm.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takashi Shibata, Takashi Kawai, Tetsuri Inoue, Yusuke Sakaguchi, Kazushige Okabe, and Yasuhiro Kuno "Development of an electro-optical 3D adapter for stereoscopic video recording", Proc. SPIE 4660, Stereoscopic Displays and Virtual Reality Systems IX, (23 May 2002); doi: 10.1117/12.468046; https://doi.org/10.1117/12.468046
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

3D label free bio-transfer standards
Proceedings of SPIE (November 06 2018)
Three D displays in military applications
Proceedings of SPIE (May 11 2009)
3D video coding an overview of present and upcoming...
Proceedings of SPIE (July 14 2010)
The Numerical Stereo Camera
Proceedings of SPIE (October 28 1981)

Back to Top