Paper
16 July 2002 Automated SEM metrology of wafers printed using a SCAA mask
Sunil Desai, Takeaki Ebihara, David Levenson, Sylvia White
Author Affiliations +
Abstract
The massive amount of data necessary to qualify a new 100nm generation technology can be efficiency collected using a CD-SEM and analyzed using Klarity ProData. By comparing the linewidths, space widths, and pitches printed in resists with different focus, exposure does, and numerical aperture with the measured reticle parameters, one can be determine optimal processing conditions and the required biasing rules for the new technology. The Sidewall Chrome Alternating Aperture Mask, a next generation alternating phase shift mask structure, is especially suitable for this as all relevant mask features are visible from the top surface which, however, is not planar and thus can confuse optical mask inspection tools. Resist patterns with line-space pitches from 220nm to 800nm and isolated lines - as well as the reticle - were measured sing a KLA-Tencor 8250 CD-SEM and analyzed with ProData. At the isofocal dose, the 70nm line - 150nm space reticle pattern printed with equal 110 nm lines and spaces at NA equals 0.63 on a Canon FPA-5000 ES3 248 nm step and scan tool, with a process window that overlapped those of less dense approximately 100 nm features.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sunil Desai, Takeaki Ebihara, David Levenson, and Sylvia White "Automated SEM metrology of wafers printed using a SCAA mask", Proc. SPIE 4689, Metrology, Inspection, and Process Control for Microlithography XVI, (16 July 2002); https://doi.org/10.1117/12.473415
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Cadmium

Scanning electron microscopy

Metrology

Optical proximity correction

Reticles

Semiconducting wafers

RELATED CONTENT

Mask error factor impact on the 130-nm node
Proceedings of SPIE (July 05 2000)
Aging study in advanced photomasks impact of EFM effects...
Proceedings of SPIE (September 24 2010)
Effect of real masks on wafer patterning
Proceedings of SPIE (July 05 2000)

Back to Top