Translator Disclaimer
16 July 2002 Dynamic in-situ temperature profile monitoring of a deep-UV post-exposure bake process
Author Affiliations +
Abstract
A system for monitoring the dynamic temperature profile during the deep UV (DUV) post exposure bake (PEB) is described. Platinum resistor temperature detectors (RTDs) are embedded into silicon wafers. Hardware and software convert the resistances to temperatures. The RTD calibration is National Institute of Standards and Technology (NIST) traceable. The wafers are tested on both a thermally uniform hot plate and a production PEB chamber. The temperature profiles for the PEB are fitted to a heat transfer model allowing heating and cooling time constants to be determined. High accuracy and precision are demonstrated.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Barney M. Cohen, Wayne G. Renken, and Paul Miller "Dynamic in-situ temperature profile monitoring of a deep-UV post-exposure bake process", Proc. SPIE 4689, Metrology, Inspection, and Process Control for Microlithography XVI, (16 July 2002); https://doi.org/10.1117/12.473441
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top