Sensitivity factors of CAR electron-beam resists

David R. Medeiros; Karen E. Petrillo; Gregory Breyta; Wu-Song Huang; Wayne M. Moreau

doi:10.1117/12.474243

24 July 2002 Sensitivity factors of CAR electron-beam resists

David R. Medeiros, Karen E. Petrillo, Gregory Breyta, Wu-Song Huang, Wayne M. Moreau

Proceedings Volume 4690, Advances in Resist Technology and Processing XIX; (2002) https://doi.org/10.1117/12.474243
Event: SPIE's 27th Annual International Symposium on Microlithography, 2002, Santa Clara, California, United States

Abstract

Over the years for enhanced resolution, electron beam exposure tools have migrated to higher accelerating potentials. High kV exposure requires faster resist to offset the loss of absorbed radiation. In addition, in order to maintain throughput in mask writing tools, photoresist sensitivities of the order of 5(mu) C/cm² at 50 kV are needed and likewise 5 (mu) C/cm² at 100 kV for projection exposure tools. To meet this sensitivity requirement there is a keen interest in using chemically amplified resists (CAR). The CAR resists offer additional benefits such as high contrast, improved resolution, larger process windows, and dry resistance. This study is focused on enhancing the sensitivity of a low activation ketal protected polyhydroxystyrene. One such resist, which has been reported previously, is insensitive to the post apply bake temperature and does not require a post exposure bake. To enhance the resolution, process latitudes, and chemical contrast, base quenchers are usually added to limit the diffusion of the acid after exposure. To improve the sensitivity of the formulation, the effect of the acid generator (AGX), type of base, base concentrations and ratios in combination with the polymer protection level has been studied. Yields of acid formed were measured by titration and NMR. It was also found that both the AGX and base has an inhibition effect on dissolution. By increasing the among of AGX and decreasing the polymer protection level, the sensitivity of the formulation was improved while maintaining the resist contrast, resolution, vacuum stability, and bake latitudes. In addition, the sensitivity of the resist can be altered by quantity and type of added base. We have also investigated the effect of Pk_a of the base on the sensitivity, and process exposure latitude. The ionic onium acid generators or non ionic hydroxyimides provide adequate acid when coupled with adjusted concentrations of base to achieve 5 (mu) C/cm² at 100 kV.

Citation Download Citation

David R. Medeiros, Karen E. Petrillo, Gregory Breyta, Wu-Song Huang, and Wayne M. Moreau "Sensitivity factors of CAR electron-beam resists", Proc. SPIE 4690, Advances in Resist Technology and Processing XIX, (24 July 2002); https://doi.org/10.1117/12.474243

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available