10 July 2002 Wave propagation sensing for damage detection in plates
Author Affiliations +
Abstract
Health monitoring of aerospace structures can be done passively by listening for acoustic waves generated by cracks, impact damage and delaminations, or actively by propagating diagnostic stress waves and interpreting the parameters that characterize the wave travel. This paper investigates modeling of flexural wave propagation in a plate and the design of sensors to detect damage in plates based on stress wave parameters. To increase understanding of the actual physical process of wave propagation, a simple model is developed to simulate wave propagation in a plate with boundaries. The waves can be simulated by applied forces and moments in the model either to represent passive damage growth or active wave generation using piezoceramic actuators. For active wave generation, the model considers a piezoceramic patch bonded perfectly to a quasi-isotropic glass-epoxy composite plate. Distributed sensors are used on the plate and are modeled as being constructed using active fiber composite and piezoceramic materials. For active wave generation, a moment impulse is generated by the actuation of a piezoceramic patch. The waves generated from the patch are detected by the distributed sensor. For passive sensing of acoustic waves, a step function is used to simulate an acoustic emission from a propagating damage. The resulting acoustic wave is measured by the distributed sensor and produces micro-strains in the sensor nodes. The strains produce a single voltage signal output from the distributed sensor. Computational simulations and animations of acoustic wave propagation in a plate are discussed in the paper. A new method to locate the source of an acoustic emission using the time history of the dominant lower frequency components of the flexural wave mode detected by continuous sensors is also presented.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anindya Ghoshal, William N. Martin, Mark J. Schulz, Aditi Chattopadhyay, William H. Prosser, "Wave propagation sensing for damage detection in plates", Proc. SPIE 4693, Smart Structures and Materials 2002: Modeling, Signal Processing, and Control, (10 July 2002); doi: 10.1117/12.475227; https://doi.org/10.1117/12.475227
PROCEEDINGS
12 PAGES


SHARE
Back to Top