Paper
11 July 2002 Performance evaluation of bending actuators made from electrostrictive graft elastomers
Ji Su, Robert C Costen, Joycelyn S. Harrison, Kenneth M. Newbury, Donald J. Leo
Author Affiliations +
Abstract
Recently a new class of electrostrictive polymers, called electrostrictive graft elastomers, was developed at NASA Langley Research Center. In this work, the output force of a bending actuator made from electrostrictive graft elastomer was measured and modeled to understand the dependence of performance on device configuration. This understanding should lead to better actuator design and fabrication. The prototype bending actuator is 47micrometers thick and 8 mm wide. The output bending force at the tip was measured as a function of applied voltage and the distance from the tip to the holding stage. The output force at 2.1 kV increases from 124(mu) N at a length of 33.5 mm to 662(mu) N at 7 mm. Accourding to a small displacement, 5-layer, a strength-of- materials model, the output bending force of the actuator varies inversely with its length and directly with the square of the applied voltage. Consequently, the output bending force can be about 5 mN when the length of the actuator is reduced to 1 mm for application to micro- electromechanical (MEMS) devices. The experimental results will be presented and a method for enhancing the performance will also be discussed.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ji Su, Robert C Costen, Joycelyn S. Harrison, Kenneth M. Newbury, and Donald J. Leo "Performance evaluation of bending actuators made from electrostrictive graft elastomers", Proc. SPIE 4695, Smart Structures and Materials 2002: Electroactive Polymer Actuators and Devices (EAPAD), (11 July 2002); https://doi.org/10.1117/12.475154
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Data modeling

Prototyping

Microelectromechanical systems

Electrodes

Polymers

Gold

Back to Top