Paper
18 January 1985 Analysis Of Rotating Component Strains Using Electronic Speckle Pattern Interferometry
R. W. T. Preater
Author Affiliations +
Proceedings Volume 0473, Symposium Optika '84; (1985) https://doi.org/10.1117/12.942382
Event: Symposium Optika '84, 1984, Budapest, Hungary
Abstract
The measurement of in-plane strain rather than out-of-plane displacement is a distinct advantage to engineers. Electronic speckle pattern interferometry (ESPI) rather than holographic interferometry can provide this type of information. The use of a pulsed laser in place of a c/w laser removes the otherwise rigorous stability requirements of conventional holographic techniques and freezes the component movement. Pulsed laser ESPI is a non-contact method which may be used under service environmental conditions. Initial tests using a tv-camera sensitive to low light levels have shown that in conjunction with precision laser triggering interference subtraction fringes can be recorded for component tangential velocities up to 5 ms-1. Digital storage and the recent incorporation of a high resolution tv-camera system has increased the tangential velocity range to 15 ms-1. The combination of this system with image derotation may enable components with much higher velocities to be studied.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. W. T. Preater "Analysis Of Rotating Component Strains Using Electronic Speckle Pattern Interferometry", Proc. SPIE 0473, Symposium Optika '84, (18 January 1985); https://doi.org/10.1117/12.942382
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Pulsed laser operation

Speckle

Speckle pattern

Electronic components

Interferometry

Laser stabilization

Mirrors

Back to Top