Translator Disclaimer
13 August 2002 Parameter transformation for improved decay rate estimation
Author Affiliations +
Decay rate estimation has been proposed as an effective method for landmine and unexploded ordnance (UXO) detection and discrimination when electromagnetic induction (EMI) sensors are employed. The phenomenological basis for this strategy is that every object in the target library (i.e., landmine and/or UXO target) possesses a unique set of decay rates that are dependent upon the physical characteristics of the target of interest. In theory, these decay rates can be estimated from the measured EMI response and then utilized for target detection and subsequent discrimination and/or classification. Since the basis for this approach to target detection and identification is that targets are uniquely characterized by their decay rates, discrimination performance is dependent upon decay rate estimation performance. Unfortunately, decay rate estimation is notoriously difficult, and this difficulty adversely impacts target discrimination performance. We propose a parameter transformation to improve both the accuracy and the robustness of decay rate estimation when the decay rates are estimated using nonlinear least squares techniques. We present simulation results showing the improvement in the both the RMS error and the bias of the estimates achieved with the parameter transformation.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stacy L. Tantum and Leslie M. Collins "Parameter transformation for improved decay rate estimation", Proc. SPIE 4742, Detection and Remediation Technologies for Mines and Minelike Targets VII, (13 August 2002);

Back to Top